High-quality construction and flawless design are crucial for light poles supporting pole lighting and street light fixtures. Our online inventory of light poles for parking lot, street lighting, and landscape lighting applications includes round and square poles in tapered and non-tapered styles, as well as square tapered hinged poles. All of our light poles feature durable steel construction. To order a specific model, call us for a custom quote. Our selection of light poles includes options for the pole shaft, base plate anchor bolts, hand hole, and finishes for the light pole assembly.

We only list a few types of poles online for purchase. If your project requires a specific type of pole, please contact us for a custom quote.

Square Non-Tapered Steel Poles

Pole Shaft

The pole shaft is one-piece construction, fabricated from a weldable grade carbon steel structural tubing with a uniform wall thickness of 11 gauge (0.1196""), 7 gauge (0.1793""), or 3 gauge (0.2391""). The pole shaft material conforms to ASTM A-500 Grade C with a minimum yield strength of 50,000 psi. The pole shaft has a full-length longitudinal resistance weld and is uniformly square in cross-section with flat sides, small corner radii, and excellent torsional properties.

Base Plate

The anchor base is fabricated from structural quality hot-rolled carbon steel plate with a minimum yield strength of 36,000 psi. The anchor base telescopes the pole shaft and is circumferentially welded top and bottom. All welds are performed in accordance with the American Welding Society specification AWS D1.1, latest edition.

Anchor Bolts

Anchor bolts are fabricated from commercial quality hot-rolled carbon steel bar with a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified. Anchor bolts shall have the threaded end galvanized a minimum of 8 inches in accordance with ASTM A-153. Fully galvanized anchor bolts are available upon request.

Handhole

An oval reinforced gasketed handhole, with a nominal 3"" x 5"" or 4"" x 6-1/2"" inside opening, located 1'-6"" above the base, is standard on all poles. Optional 5"" x 8"" and 4"" x 10"" handholes are available. A grounding provision is located inside the handhole ring.

Finishes

The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes. Hot dip Galvanized finish to ASTM A-123 specification or primed finish is also available. For optional finishes, see K-KLAD and K-KLAD Over Galvanizing.

Square Tapered Steel Poles

Pole Shaft

The pole shaft is one or two-section design, each section fabricated from standard 11 gauge (0.1196""), 7 gauge (0.1793""), or 3 gauge (0.2391"") steel. The pole shaft material is a weldable grade hot-rolled commercial quality carbon steel with a guaranteed minimum yield strength of 55,000 psi after fabrication. Each section is one-piece construction with a full-length longitudinal weld and is square in cross-section with a uniform taper of 0.10 inches of diameter change per foot of length.

Base Plate

The anchor base is fabricated from structural quality hot-rolled carbon steel plate with a minimum yield strength of 36,000 psi. The anchor base telescopes the pole shaft and is circumferentially welded top and bottom. All welds are performed in accordance with the American Welding Society specification AWS D1.1, latest edition.

Anchor Bolts

Anchor bolts are fabricated from commercial quality hot-rolled carbon steel bar with a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified. Anchor bolts shall have the threaded end galvanized a minimum of 8 inches in accordance with ASTM A-153. Fully galvanized anchor bolts are available upon request.

Handhole

An oval reinforced gasketed handhole, with a nominal 3"" x 5"" or 4"" x 6-1/2"" inside opening, located 1'-6"" above the base, is standard on all poles. Optional 5"" x 8"" and 4"" x 10"" handholes are available. A grounding provision is located inside the handhole ring.

Finishes

The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes. Hot dip Galvanized finish to ASTM A-123 specification or primed finish is also available. For optional finishes, see K-KLAD and K-KLAD Over Galvanizing.

Round Tapered Steel Poles

Pole Shaft

The pole shaft is one or two-section design, fabricated from standard 11 gauge (0.1196""), 7 gauge (0.1793""), or 3 gauge (0.2391"") steel. The pole shaft material is a weldable grade hot-rolled commercial quality carbon steel with a guaranteed minimum yield strength of 55,000 psi after fabrication. Each section is one-piece construction with a full-length longitudinal weld and is cylindrical in cross-section with a uniform taper of 0.14 inches of diameter change per foot of length.

Base Plate

The anchor base is fabricated from structural quality hot-rolled carbon steel plate with a minimum yield strength of 36,000 psi. The anchor base telescopes the pole shaft and is circumferentially welded top and bottom. All welds are performed in accordance with the American Welding Society specification AWS D1.1, latest edition.

Anchor Bolts

Anchor bolts are fabricated from commercial quality hot-rolled carbon steel bar with a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified. Anchor bolts shall have the threaded end galvanized a minimum of 8 inches in accordance with ASTM A-153. Fully galvanized anchor bolts are available upon request.

Handhole

An oval reinforced gasketed handhole, with a nominal 3"" x 5"" or 4"" x 6-1/2"" inside opening, located 1'-6"" above the base, is standard on all poles. Optional 5"" x 8"" and 4"" x 10"" handholes are available. A grounding provision is located inside the handhole ring.

Finishes

The standard finish is a polyester thermosetting powder coating applied to the surface of the substrate to a minimum of 3 mils for all color finishes. Hot dip Galvanized finish to ASTM A-123 specification or primed finish is also available. For optional finishes, see K-KLAD and K-KLAD Over Galvanizing.

Round Non-Tapered Steel Poles

Pole Shaft

The pole shaft is one-piece construction, fabricated from a weldable grade carbon steel structural tubing with a uniform wall thickness of 11 gauge (0.1196"") or 7 gauge (0.1793""). The pole shaft material conforms to ASTM A-500 Grade C with a minimum yield strength of 50,000 psi. The pole shaft has a full-length longitudinal resistance weld and is uniformly cylindrical in cross-section with round sides and excellent torsional properties.

Base Plate

The anchor base is fabricated from structural quality hot-rolled carbon steel plate with a minimum yield strength of 36,000 psi. The anchor base telescopes the pole shaft and is circumferentially welded top and bottom. All welds are performed in accordance with the American Welding Society specification AWS D1.1, latest edition.

Anchor Bolts

Anchor bolts are fabricated from commercial quality hot-rolled carbon steel bar with a minimum yield strength of 55,000 psi. Four properly sized anchor bolts, each with two regular hex nuts and washers, are furnished and shipped with all poles unless otherwise specified. Anchor bolts shall have the threaded end galvanized a minimum of 8 inches in accordance with ASTM A-153. Fully galvanized anchor bolts are available upon request.

Handhole

An oval reinforced gasketed handhole, with a nominal 2"" x 4"" or 3"" x 5"" inside opening, located 1'-6"" above the base, is standard on all poles. A grounding provision is located inside the handhole ring.